Appropriate technology for mould makers

原作者:[标签:作者] 添加时间:2007-06-27 原文发表:2007-06-27 人气:7

内容摘要:m. The toolholder clamps into the turret with just a half turn of an allen key.Another Coromant tool holding system that is increasingly applied in die and mould is CoroGrip, a system that covers all applications from super finishing to heavy roughing.One holder can clamp all types of tools from face mills to drills and a wide range of proprietary collets can also be used with the holders.All CoroGrip tool holders are individually balanced and the symmetrical clamping forces in the system maintain its low run out even in the most arduous roughing conditions.Coromant's CoroMill Plura range of solid carbide tools are particularly useful in these conditions as experienced by die and mould manufacturers.'CoroGrip and Plura are a perfect match' says Pollard. 'The advanced machining capabilities of Plura and the high precision of CoroGrip chucks offer a highly stable combination.'Plura has been specifically designed for HSM applications with tool geometries and its grade family profile allowing the best possible productivity in all work piece materials.'So, how does Coromant's argument for using HSM in preference to EDM work in practice。60.00 per hour machining time the EDM route - manufacturing the roughing and finishing electrodes, machining the finished part and final polishing was

本页地址

• 模具车间成功的关键

• 注射模具的结构组成

• 快速成形技术在模具制造中的应用

• 高压密封垫圈成形工艺及级进模设计

• 创造性思维与方法在实际工作中的运用尝试

• 基于逆向工程的模具CAD/CAM/DNC技术