从图8的实测波形可知:未经差动平衡处理的T1电流传感器的波形1中,干扰信号明显大于内部局部放电信号(即局部放电信号被淹没),信噪比为0.516(模拟)、1.25(带电);经差动平衡系统处理后的波形2中,干扰信号被显著抑制。信号经处理后的信噪比为:不带电模拟试验中信噪比约为1.6,提高了3.1倍;带电试验中信噪比约为4,提高了3.2倍。 应当指出,虽然在一定频率范围内可以将变压器等效为一个电容等效电路[6],但实际大型电力变压器的等效网络比模拟等效电路模型复杂得多。因此,模拟等效电路模型的试验只能验证本文提出的定向耦合差动平衡法的有效性;900kVA/150kV单相试验变压器与实际的500kV单相变压器的结构更接近一些,其试验结果更具有参考价值。在实际采用本系统时,尚须对参数作相应调整,但其基本原理不变。 a 模拟测试 a Simulation Test
b 带电测试 b On-line Test 图8差动系统输出与原始信号的波形比较 Fig.8 Qutput of difference balance system and original singal 5结论 (1) 现有的差动平衡法和极性鉴别法得到的是综合信息,无法判断放电的相序位置;差动平衡法抑制干扰效果较差,极性鉴别法又可能丢失局部放电信号。 (2) 定向耦合差动平衡法用两个电流传感器分别从高压套管和套管末屏接地线耦合信号,经调幅、调相后再送入差动平衡系统处理,不仅能有效抑制外部干扰,而且能对放电的相序定位。 (3) 模拟等效电路模型、单相试验变压器不带电和带电试验结果证明,定向耦合差动平衡法原理正确,效果显著,有良好应用前景。
6参考文献 1Borisi H,et al.Application of Rogowiski Coils for Partial Discharge Decoupling and Noise Suppression ISH.1987,42.02 2 Black I A et al.The Application of The Pulse Discrimination System to The Measurement of Partial Discharge Insulation under Nosie Condition,1987 IEEE Int.Symposium on E.1.Conf.Record 3 朱德恒等.在线监测变压器局部放电的微机系统.高电压技术,1992,(3) 4罗兵,孙才新等.变压器局部放电在线监测中的电磁干扰抑制方法研究.高压电路,1995,(3) 5罗兵,孙才新等.变压器局部放电在线监测的非磁性心棒式电流传感器的研究.电工技术学报,1995,(4) 6Su Q,James R.E.Analysis of Partial Discharge Pulse Distribution Along Transformer Windings Using Digital Filtering Techniques.IEEE procedings-c-vol-139,No.5 September 1992
Method of Directional Difference Balance to Suppress Electromagnetic Interference in on-line Monitoring Partial Discharge in Transformer
Sun Caixin Luo Bing Du Lin Li Jian Gu Leguan (Chongqing University Chongqing 400044)
AbstractThis paper presents the directional difference balance method(DDB) according to the analyzing the property of suppressing electromagnetic interference either with difference balance method or polar discrimination method.The fundamental principle and characteristic of DDB method is discussed in detail.Linearity and suppressing noise property of the system is analyzed so that its efficiency and application prospect is proved. KeyWordstransformer partial discharge on-line monitoring directional difference balance method